The new Kühligel®

/
/
/
/
/
The new Kühligel®
pressefoto_hxb

By mounting an axial fan, the effectiveness of the new Kühligel® can be increased considerably.

Fanless solutions require a lot of space. They are heavy and expensive. For cooling with active coolers by SEPA EUROPE however, the new Kühligels are not only small and light but also extremely inexpensive.

Thanks to intensive development work, SEPA EUROPE was able to construct a heat sink that enables fan mounting without extensive reworking using conventional screws. The choice of the suitable fan (size, sleeve or ball bearings, 5, 12, or 24 VDC, tacho, connector) enables the best possible combination that is required for the application in question. The fans used have a MTBF of up to 350000h (40°C) and thus meet the highest requirements.

Thanks to its light weight, the Kühligel® can usually be mounted using double-sided adhesive heat conduction pads (TCTxx) or thermally conductive two-component adhesive (Hernon 746) which are both available from the SEPA EUROPE product range.